|Low installation height:
55 mm for drains with an outlet pipe diameter of 40 mm (suitable for renovations).
85 mm for drains with an outlet pipe diameter of 50 mm (suitable for new buildings).
Stainless Steel DIN 1.4301 (ČSN 17240).
Treatments of materials employed:
The collar and trap are protected by foil, and the channel itself by a styrofoam insert.
|HIGH FLOWRATE (60 l/min.)||Maximum water flow:
60 l/min. for drains with an outlet pipe diameter of 50 mm.
35 l/min. for drains with an outlet pipe diameter of 40 mm.
Two traps in one: the high flowrate achieved is due to the double compartment trap system.Czech standard: ČSN EN 1253
|COMPLETELY CLEANABLE TRAP||Material used: polypropylene
The protective grid trap will catch most of the dirt, but by removing it and the inlet part you can clean the drain all the way to the waste pipe!
|HARMONY OF COLOURS|
|COMPLETE PACKAGE INCLUDING ALL ACCESSORIES||Complete package including all accessories:
|TAILORED TO FIT SOLUTIONS
WITHIN 30 DAYS
|Range of lengths: 300–2,200 mm for a single section. Lengths greater than 2,200 mm can be achieved by connecting sections as required.
Different edge heights and depths of the drainage channel can be supplied on request.Traps: Can be positioned wherever the customer wishes and, depending on the water flow, more than one trap can be used in a single drain.
Materials: The standard grade of stainless steel employed is DIN 1.4301 (ČSN 17240). For aggressive environments (e.g. pools), it is stainless steel DIN 1.4404 (ČSN 17349).
|ALCA drain MINI
Length: 300 mm
Application: Universal use as a floor or shower drain.
Advantage: High flowrate of 40 l/min.